83.080 塑料
Plastics
1285条标准13页第 5 页
上级分类:83 橡胶与塑料工业
ISO 1873-2:1989 ISO
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties
1989 年现行
ISO 1874-1:1985 ISO
Plastics — Polyamide (PA) homopolymers for moulding and extrusion — Part 1: Designation
1985 年现行
ISO 1874-2:1987 ISO
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
1987 年现行
ISO 1875:1982 ISO
Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether
1982 年现行
ISO 18830:2016 ISO
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer
2016 年现行
ISO 18872:2007 ISO
Plastics — Determination of tensile properties at high strain rates
2007 年现行
ISO 19062-1:2015 ISO
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015 年现行
ISO 19062-2:2019 ISO
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 19063-1:2015 ISO
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015 年现行
ISO 19063-2:2020 ISO
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2020 年现行
ISO 19064-1:2015 ISO
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015 年现行
ISO 19064-2:2020 ISO
Plastics — Styrene-acrylonitrile (SAN) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2020 年现行
ISO 19065-1:2014 ISO
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2014 年现行
ISO 19065-2:2019 ISO
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 19066-1:2014 ISO
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2014 年现行
ISO 19066-2:2020 ISO
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2020 年现行
ISO 19069-1:2015 ISO
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015 年现行
ISO 19069-2:2016 ISO
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2016 年现行
ISO 19252:2008 ISO
Plastics — Determination of scratch properties
2008 年现行
ISO 194:1981 ISO
Plastics — List of equivalent terms
1981 年现行
ISO 19679:2016 ISO
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
2016 年现行
ISO 19717:2026 ISO
Plastics — Differential scanning calorimetry (DSC) or thermogravimetric analysis (TGA) — Model-free kinetics based on the non-linear incremental isoconversional method
2026 年现行
ISO 19721:2022 ISO
Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
2022 年现行
ISO 19892:2011 ISO
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
2011 年现行
ISO 19929:2017 ISO
Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
2017 年现行
ISO 19935-1:2018 ISO
Plastics — Temperature modulated DSC — Part 1: General principles
2018 年现行
ISO 19935-2:2020 ISO
Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
2020 年现行
ISO 19935-3:2021 ISO
Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions
2021 年现行
ISO 20028-1:2017 ISO
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2017 年现行
ISO 20028-2:2017 ISO
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2017 年现行
ISO 20029-1:2017 ISO
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specification
2017 年现行
ISO 20029-2:2017 ISO
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
2017 年现行
ISO 20200:2004 ISO
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
2004 年现行
ISO 20329:2020 ISO
Plastics — Determination of abrasive wear by reciprocating linear sliding motion
2020 年现行
ISO 20368:2017 ISO
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
2017 年现行
ISO 2039-1:1987 ISO
Plastics — Determination of hardness — Part 1: Ball indentation method
1987 年现行
ISO 2039-2:1981 ISO
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
1981 年现行
ISO 2039:1973 ISO
Plastics and ebonite — Determination of hardness by the ball indentation method
1973 年现行
ISO 20557-1:2018 ISO
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2018 年现行
ISO 20557-2:2018 ISO
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
2018 年现行
ISO 20558-1:2018 ISO
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2018 年现行
ISO 20558-2:2018 ISO
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
2018 年现行
ISO 20568-1:2017 ISO
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications
2017 年现行
ISO 20568-2:2017 ISO
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2017 年现行
ISO 20753:2008 ISO
Plastics — Test specimens
2008 年现行
ISO 20965:2005 ISO
Plastics — Determination of the transient extensional viscosity of polymer melts
2005 年现行
ISO 21048:2004 ISO
Plastics — Epoxy resins — Determination of 1,2-glycol content
2004 年现行
ISO 2112:1977 ISO
Plastics — Aminoplastic moulding materials — Specification
1977 年现行
ISO 2114:1974 ISO
Plastics — Unsaturated polyester resins — Determination of acid value
1974 年现行
ISO 2115:1996 ISO
Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
1996 年现行
ISO 21257:2018 ISO
Plastics — Polymer polyols for use in the production of polyurethane — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography
2018 年现行
ISO 21301-1:2019 ISO
Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2019 年现行
ISO 21301-2:2019 ISO
Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 21302-1:2019 ISO
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2019 年现行
ISO 21302-2:2019 ISO
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 21304-1:2019 ISO
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2019 年现行
ISO 21304-2:2021 ISO
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2021 年现行
ISO 21305-1:2019 ISO
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification
2019 年现行
ISO 21305-2:2019 ISO
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 21306-1:2019 ISO
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2019 年现行
ISO 21306-2:2019 ISO
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 21309-1:2019 ISO
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 1: Designation system and basis for specifications
2019 年现行
ISO 21309-2:2019 ISO
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2019 年现行
ISO 21318:2007 ISO
Plastics — Epoxy resins — Determination of electrical conductivity of aqueous resin extracts
2007 年现行
ISO 21367:2007 ISO
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
2007 年现行
ISO 21475:2019 ISO
Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
2019 年现行
ISO 21509:2006 ISO
Plastics and ebonite — Verification of Shore durometers
2006 年现行
ISO 21627-1:2002 ISO
Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine
2002 年现行
ISO 21627-2:2002 ISO
Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine
2002 年现行
ISO 21627-3:2002 ISO
Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine
2002 年现行
ISO 21702:2019 ISO
Measurement of antiviral activity on plastics and other non-porous surfaces
2019 年现行
ISO 21970-1:2018 ISO
Plastics — Polyketone (PK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2018 年现行
ISO 21970-2:2018 ISO
Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2018 年现行
ISO 22007-1:2009 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
2009 年现行
ISO 22007-2:2008 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
2008 年现行
ISO 22007-3:2008 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
2008 年现行
ISO 22007-4:2008 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
2008 年现行
ISO 22007-6:2014 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
2014 年现行
ISO 22007-7:2023 ISO
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
2023 年现行
ISO 22088-1:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance
2006 年现行
ISO 22088-2:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method
2006 年现行
ISO 22088-3:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method
2006 年现行
ISO 22088-4:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method
2006 年现行
ISO 22088-5:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method
2006 年现行
ISO 22088-6:2006 ISO
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method
2006 年现行
ISO 22183:2023 ISO
Plastics — Validation of force-time curves obtained from high-speed tensile tests
2023 年现行
ISO 22196:2007 ISO
Plastics — Measurement of antibacterial activity on plastics surfaces
2007 年现行
ISO 22403:2020 ISO
Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements
2020 年现行
ISO 22404:2019 ISO
Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
2019 年现行
ISO 22498:2005 ISO
Plastics — Vinyl chloride homopolymer and copolymer resins — Particle size determination by mechanical sieving
2005 年现行
ISO 22526-1:2020 ISO
Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles
2020 年现行
ISO 22526-2:2020 ISO
Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
2020 年现行
ISO 22526-3:2020 ISO
Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification
2020 年现行
ISO 22526-4:2023 ISO
Plastics — Carbon and environmental footprint of biobased plastics — Part 4: Environmental (total) footprint (Life cycle assessment)
2023 年现行
ISO 22766:2020 ISO
Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions
2020 年现行
ISO 23153-1:2020 ISO
Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2020 年现行
ISO 23153-2:2020 ISO
Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2020 年现行
ISO 23512:2021 ISO
Plastics — Joining of thermoplastic moulded components — Specification of variables for thermal joining processes
2021 年现行
ISO 23524:2022 ISO
Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
2022 年现行
ISO 23673:2021 ISO
Plastics — Elasticity index — Determination of elastic property of melts
2021 年现行
